V1

LED High Bay for Factory and Warehouse

  • Long neck, easily installation
  • Original design by RED100, the inventor of The middle-hole convection, 30% increase in heat dissipation.
  • With light-weight, more safety
  • Easy To Install Like A Bulb!
  • If it with the lamp cover, beam angle change from 120°to 100°

Application

Suitable for factory, warehouse, parking lot and other Manufacturing Facilities.

Features & Benefits

  • LED High Bay for Factory and Warehouse 01

    Long neck, High-power LED bulb, first choice for workshop & warehouse

    Traditional hook high-bay is difficult to replace, red100 screw high-bay, easy to install like a bulb! Easy to replace like a bulb!

    Perfect performance

    1. Original design by RED100.the inventor of the middle-hole convection, 30% increase in heat dissipation.
    2. With STC, when the temperature is more than 85°,the power will be adjusted smartly
    3. Only 450g, the same products in market is more than 900g
    4. Long neck, suitable for more lighting fixture
    5. With lamp cover, beam angle change from 120°to 90°
    6. Suitable for 4 to 12 meters height large space environment
  • LED High Bay for Factory and Warehouse 03

    High lm/watt, high Lux

    2 factors influencing Lux: Lm/watt and Beam angle.

    With middle hole convective channel for heat dissipation, the led chips’ temperature is 29% lower than normal products, and the Luminous Efficiency increased by 33% (long neck is 120lm/w, normal product is 90lm/w).
    Perfect beam angle 120°, large beam angle, large illuminate range, low lux, small beam angle, small illuminate range, high lux.

  • LED High Bay for Factory and Warehouse 02

    Break through traditional technology: Mid-hole Convection Heat Dissipation Technology

    RED100 designers learned from wind tunnel principle, then the designers creatively use wind tunnel concept into the design of high power LED and develop wind tunnel type middle hole convection heat dissipation technology.

    The original mid-hole convection heat dissipation design increases the heat dissipation capacity by 30%, and contributes to a longer service life!

    Makes full use of the principal air convection, increases the convection heat dissipation ability so as to enhance the lamp heat dissipation ability by 30%.Red100 is the inventor of the Mid-hole convection heat dissipation in China.

Specification

Model No. Wattage(w) Input Voltage(v) PF Ra Lumen(lm) Beam Angle Size(mm) Working Temp. Life Time(H) Cap Base Carton Size cm/pcs CBM CTN m³ Weight/pcs
V1 40 100-240 0.9 80 3600 120° 145*220 -20-40℃ 25000 E27/E40 48.5*32.5*26/6 0.040 392g
V1 60 100-240 0.9 80 5400 120° 170*230 -20-40℃ 25000 E27/E40 56*37.5*27/6 0.056 541g
V1 80 100-240 0.9 80 7200 120° 190*275 -20-40℃ 25000 E40 41.5*41.5*31/4 0.053 696g
V1 100 100-240 0.9 80 9000 120° 190*275 -20-40℃ 25000 E40 41.5*41.5*31/4 0.053 740g
V1 120 100-240 0.9 80 10800 120° 230*306 -20-40℃ 25000 E40 51*51*35/4 0.091 1100g
V1 160 100-240 0.9 80 14400 120° 280*350 -20-40℃ 25000 E40 63*63*40.2/4 0.159 1600g