T3S

LED T Bulb Die-Casting Aluminum for Shops and Store

  • Slope Anti-dust Design, let dust slip off!
  • lamp and cover free combination
  • Internal STC System
  • When the internal temperature is too high, the STC will automatically adjust the temperature by controlling the current

Application

Suitable for shops and stores

Features & Benefits

  • LED T Bulb Die-Casting Aluminum for Shops and Store01

    A Smart Lamp!

    Internal STC System: When the internal temperature is too high, the STC will automatically adjust the temperature by controlling the current.

    Built-in temperature controller, it will adjust the internal temperature of the amp automatically according to the ambient temperature changes. When the driver or power components temperature exceed the standard value the protection mode will be actively lower the power, so it can ensure the product reliability and lifespan. Each lamp becomes “smart” with the built-in temperature controller

  • LED T Bulb Die-Casting Aluminum for Shops and Store02

    Slope Anti-dust Design

    The lamp is easy to be contaminated with dust and is difficult to clean. At night, the lamp will attract various mosquitoes to inhabit it, and it will also be contaminated with a lot of dirt. In addition to this reason, it is also because the bulb itself needs to be energized to light up, so the surface of the bulb has a tiny charge that will attract dust in the air. Dust affects the brightness and lifetime of the lamp.

    T3s had the Slope Anti-dust Design, Let Dust Slip Off! Red100 engineers get the inspiration from skating, compare to the last generation, Aluminum-sheet cooling material groove with slope anti-dust design, effectively avoid the dust accumulated, increasing the heat dissipation, Make sure the heat dissipation channel unhindered.

  • LED T Bulb Die-Casting Aluminum for Shops and Store03

    Perfect design!

    With Good antiflaming and heat transmission PC house, Die casting aluminum heat sink, Smart IC driver, STC Technology, High transmittance, PC diffuser.

    The cooling surface area of the first generation T-PLUS is 57,000m㎡,The new generation shop bulbs with aluminum die casting-sheet design, Make sure the  heat dissipation area increasing 30%,welding temperature is reduced 10degree.

    Lamp and cover free combination, Beam Angle with Cover is 100°, detachable easy to install.

    Application: Warehouse, HOTEL, Sitting rooms/Stations/Meeting rooms/Shopping malls.

Specification

Model No. Wattage(w) Input Voltage(v) PF Ra Lumen(lm) Beam Angle Size(mm) Working Temp. Life Time(H) Cap Base Carton Size cm/pcs CBM CTN m³ Weight/pcs
T3S 15 175-265 0.5 80 1210 240° 65*125 -20-40℃ 15000 E27 58*37*15.5/40 0.033 128g
T3S 20 100-240 175-265 0.9 0.5 80 1800 1620 240° 80*150 -20-40℃ 20000 15000 E27 44.5*36*18.5/20 0.029 185g
T3S 30 100-240 175-265 0.9 0.5 80 2700 2430 240° 100*180 -20-40℃ 20000 15000 E27 54.5*44*21/20 0.050 305g
T3S 40 100-240 175-265 0.9 0.5 80 3600 3240 240° 118*210 -20-40℃ 20000 15000 E27/E40 51.2*38.8*24.2/12 0.048 440g
T3S 50 100-240 175-265 0.9 0.5 80 4500 4050 240° 135*238 -20-40℃ 20000 15000 E27/E40 58*29.5*27/8 0.046 635g
T3S 70 100-240   175-240 0.9 0.5 80 6300 5600 240° 135*238 -20-40℃ 20000 15000 E27/E40 58*29.5*27/8 0.048 635g
T3S 100 100-240   175-240 0.9 0.5 80 9000 8000 240° 145*285 -20-40℃ 20000 15000 E40 58*29.5*32/8 0.054 970g